Double-Headed Espresso Tamper and Distributor by Ecocoffee

Take your Breville skills and style up a notch with a professional, dual-head portafilter leveler and tamp.

Do justice to your brew. Level, evenly distributed grounds are an essential first step in achieving the perfectly packed basket of fine ground espresso. Twist the 3 leaf clover dial side down 3 times to evenly disperse the grounds. Turn your tool over and use the flat base palm tamper. Packing the grounds tight creates the right amount of pressure for a proper espresso pull.

The adjustable height of the distributor allows some control over depth of your pack (*remember - a full basket is required to get a tight pack and high quality pour. If the basket isn't completely full the tool will not reach your grounds. For best results, groom the top of the basket with a flat edge before leveling and tamping).

Use the distribution/leveling side to evenly distribute the grounds in your portafilter, then flip to the adjustable tamper side for a uniform tamp, every time.

HERE'S HOW IT WORKS:

STEP 1 - Load your portafilter basket with the desired amount of freshly ground coffee.

STEP 2 - Retract the distributor side to it's shallowest depth, and place the distributor on your portafilter, blade side down.

STEP 3 - Gently spin the distributor until your coffee grounds have been evenly distributed and leveled. If the distributor does not reach the coffee, adjust the depth accordingly. Note: you do not want to be applying heavy pressure to the grounds at this stage -- only enough to level the coffee in the basket.

STEP 4 - Flip the distributor over and extend the tamper (flat side) to its maximum height. Tamp your grounds to your desired pressure.

STEP 5 - For consistent tamping every time, adjust the tamper depth so it matches the depth of the tamp you created in Step 4.